|
|
Humidistats
Relative humidity (RH) in buildings is recommended to be maintained between 25% and 80% in winter and 20% and 70% in summer. Regin humidity transmitters keep it under control at any season.
Regin humidistat are used for controlling humidifying and/or dehumidifying in HVAC systems. The humidistats have hair or a synthetic element as sensor medium. The sensor stretches as the humidity increases and shrinks as the humidity decreases. The changes are transmitted to a micro switch. The setpoint can be set at between 10 and 100% RH.
HR-S - electro-mechanical room humidistat with a synthetic element.
HR1, HR1-DH,HR2 - electro-mechanical room humidistat with change-over contact. The humidistat is intended for wall-mounting and has tamper proof settings.
HMH - electro-mechanical humidistat with change-over contact. The humidistat is intended for wall-mounting or for mounting in ducts.
HD - electronic humidistat with one or two relay outputs. The humidistat is intended for mounting on DIN-rail. An external transmitter is connected to the module.
HRD1-24 - electronic humidistat with one relay output. For wall-mounting .
HDD1-24 - electronic humidistat with one relay output. For duct-mounting .
----------------------------------------------------------------------------------
ELECTRO-MECHANICAL 1-STEP HUMIDISTAT HR-S
|
Humidistat HR-S
Output: 1, 230 V AC, 5A, change-over
Setpoint: 35...95% RH
Hysteresis: 7% RH
Mounting: Wall-mounting
Protection class: IP30 |
 | ----------------------------------------------------------------------------------
ELECTRO-MECHANICAL HUMIDISTAT HR
|
Humidistat HR
Output: 5A, 250 V AC, (HR1/HR2)
Output: 10A (HR1-DH)
Setpoint: 10...95% RH
Hysteresis: 4% RH
Step differential: (HR2) 0...30 % RH
Mounting: Wall-mounting
Protection class: IP21
HR1 - 1-step, 5A
HR1-DH - 1-step for dehumidifying, 250 V AC
HR2 - 2-step, 5A |
 | ----------------------------------------------------------------------------------
ELECTRO-MECHANICAL HUMIDISTAT HMH
|
Humidistat HMH
Output: 10 A, 250 V AC, change-over
Setpoint: 10...100% RH
Hysteresis: 3% RH
Step differential: (HMH2) 0...25 % RH
Mounting: Duct or wall-mounting
Protection class: IP54
HMH - 1-step
HMH2- 2-step
HPH148 - proportional 0-148 ohms
HPH1000 - proportional 0-1000 ohms |
 | ----------------------------------------------------------------------------------
ELECTRONIC HUMIDISTAT HD
|
Humidistat HD
Supply voltage: 24 V AC +/-10%, 2 VA
Output: 1 arba 2, 10 A, 250 V AC
Input: 0...10 V DC
Humidity rangeability: 20...95% RH
Hysteresis: 1...20% RH
Step differential: (HD2) 0...20 % RH
Mounting: DIN-rail, 3 modules
Protection class: IP20
HD1-24/D - 1-step, change-over contact
HD2-24/D- 2-step, closing contacts |
 | ----------------------------------------------------------------------------------
ELECTRONIC 1-STEP HUMIDISTAT HRD1-24
|
Humidistat HRD1-24
Supply voltage: 24 V AC/DC +/-15%, 1 VA
Output: 1, 5A, 24 V AC, change-over
Setpoint: 10...95% RH
Hysteresis: 3...15% RH
Mounting: Wall-mounting
Protection class: IP65 |
 | ----------------------------------------------------------------------------------
ELECTRONIC 1-STEP HUMIDISTAT HDD1-24
|
Humidistat HDD1-24
Supply voltage: 24 V AC/DC +/-15%, 1 VA
Output: 1, 5A, 24 V AC, change-over
Setpoint: 10...95% RH
Hysteresis: 3...15% RH
Insertion length: 60...230, adjustable
Mounting: Dust-mounting
Protection class: IP65 |
 | ----------------------------------------------------------------------------------
Ever Yours
NIT
|
