|
|
Electric heating controllers
These PULSER controllers are intended for control of radiators or electric heating batteries. They can either be mounted on a wall or in a cabinet. The controllers pulse the entire power output ON/OFF and utilise time-proportional triac-control. Automatic adaption of control function, P or PI-control.
Pulser-DSP is a room controller intended for electric heating control. The controller can be connected to 1-phase or 2-phase electric heating i.e electric batteries, radiators etc. Pulser-DSP has a built-in sensor and an external sensor can be used, as well. Presence detector can be connected for control of so called comfort heating. this means that, when the room is empty, the controller is set to stand-by position with reduced setpoint. Setpoint, P-band and stand-by settings etc. are set by using the buttons on the controller.
Pulser-LON is a room controller based on LON-technology. It has a triac output for controlling electric heating (10 A) and an extra output (cooling or heating), 3-position or 24 V AC thermal actuator. The controller has a built sensor and setpoint knob. The setpoint can be shifted +/-3C. An external sensor or setpoint device can also be used. Pulser-LON can operate in different running modes: present, nonpresent and stand-by. The basic setpoint can be shifted with different values for heating and cooling. A window contact can be used to block the control when a window is open.
The controller TTC2000 is designed for wall-mounting and can be used with internal or external setpoint. Automatic adaption of control function, P or PI control. The controller can aso be set to be controlled by an external 0...10 V DC signal. To control extra load the slave board TT-S1 can be easily mounted into the unit.
These TTC-electric heating controllers are intended for control of electric heating bateries or radiators. The controller pulses the entire power output ON/OFF and utilises time-proportional triac control. The controller is intended for DIN-rail mounting. Automatic adaptation of control function, P or PI control. It can also be set to be controlled by an external 0 ...10 V DC signal.
----------------------------------------------------------------------------------
ELECTRIC HEATING CONTROLLERS PULSER
|
Pulser
Supply voltage: 200...415 V AC, 50...60 Hz,
1~ ar 2~, automatic adaptation
Pulse period: 60 s
Output: 16 A (1 A) 1~ max 3,6kW, 2~ max 6,4kW
Protection class: IP30
Mounting: Wall-mounting
More >  Pulser.pdf |
 | ----------------------------------------------------------------------------------
ELECTRIC HEATING CONTROLLERS PULSER/D
|
Pulser/D
Supply voltage: 200...415 V AC, 50...60 Hz,
1~ ar 2~, automatic adaptation
Pulse period: 60 s
Output: 16 A (1 A) 1~max 3,6kW, 2~ max 6,4kW
Protection class: IP20
Mounting: DIN-rail
More > Pulser.pdf |
 | ----------------------------------------------------------------------------------
ELECTRIC HEATING CONTROLLERS PULSER-ADD
|
Pulser-ADD
Supply voltage: 200...415 V AC, 50...60 Hz,
1~ ar 2~, automatic adaptation
Pulse period: 60 s
Output: 16 A (1 A) 1~ max 3,6kW, 2~ max 6,4kW
Protection class: IP30
Mounting: Wall-mounting
More > Pulser.pdf |
 | ---------------------------------------------------------------------------------
ELECTRIC HEATING CONTROLLERS PULSER-DSP
|
Pulser-DSP
Supply voltage: 200...415 V AC,
automatic adaptation
Comfort heating: 0...30°C
Output: 2,6 kW prie 230 V AC,
4 kW prie 400 V AC
Protection class: IP30
Mounting: Wall-mounting
More > Pulser.pdf |
 | ----------------------------------------------------------------------------------
Other electric heating controllers PULSER-M, PULSER-X/D, PULSER-HC-LON under request.
---------------------------------------------------------------------------------
ELECTRIC HEATING CONTROLLERS TTC2000
|
TTC2000
Supply voltage: 3~, 210...255/380...415 V AC,
automatic adaptation
Output: Max 25A, min 3 A/fazė
Control signal: 0...10 V DC
Protection class: IP30
Mounting: Wall-mounting
More > TTC.pdf |
 | ---------------------------------------------------------------------------------
ELECTRIC HEATING CONTROLLERS TTC25
|
TTC25
Supply voltage: 3~, 210...255/380...415 V AC,
automatic adaptation
Output: 25 A, 400 V AC, 17 kW (230 V, 10 kW)
Control signal: 0...10 V DC
Protection class: IP20
Mounting: DIN-rail
More > TTC.pdf |
 | ----------------------------------------------------------------------------------
ELECTRIC HEATING CONTROLLERS TTC40F
|
TTC40F
Supply voltage: 3~, 210...255/380...415 V AC,
automatic adaptation
Output: 40 A, 400 V AC, 27 kW (230 V, 16 kW)
Control signal: 0...10 V DC
Protection class: IP20
Mounting: DIN-rail
More > TTC.pdf |
 | ----------------------------------------------------------------------------------
ELECTRIC HEATING CONTROLLERS TTC80F
|
TTC80F
Supply voltage: 3~, 400 V AC,
Output: 80 A, 400 V AC, 55 kW
Control signal: 0...10 V DC
Protection class: IP20
Mounting: DIN-rail
More > TTC.pdf |
 | ---------------------------------------------------------------------------------
Other electric heating controllers TTC25X, TTC40FX, TTC63F under request.
---------------------------------------------------------------------------------
Ever Yours
NIT
|
