|
|
Electric heating controllers
These PULSER controllers are intended for control of radiators or electric heating batteries. They can either be mounted on a wall or in a cabinet. The controllers pulse the entire power output ON/OFF and utilise time-proportional triac-control. Automatic adaption of control function, P or PI-control.
Pulser-DSP is a room controller intended for electric heating control. The controller can be connected to 1-phase or 2-phase electric heating i.e electric batteries, radiators etc. Pulser-DSP has a built-in sensor and an external sensor can be used, as well. Presence detector can be connected for control of so called comfort heating. this means that, when the room is empty, the controller is set to stand-by position with reduced setpoint. Setpoint, P-band and stand-by settings etc. are set by using the buttons on the controller.
Pulser-LON is a room controller based on LON-technology. It has a triac output for controlling electric heating (10 A) and an extra output (cooling or heating), 3-position or 24 V AC thermal actuator. The controller has a built sensor and setpoint knob. The setpoint can be shifted +/-3C. An external sensor or setpoint device can also be used. Pulser-LON can operate in different running modes: present, nonpresent and stand-by. The basic setpoint can be shifted with different values for heating and cooling. A window contact can be used to block the control when a window is open.
The controller TTC2000 is designed for wall-mounting and can be used with internal or external setpoint. Automatic adaption of control function, P or PI control. The controller can aso be set to be controlled by an external 0...10 V DC signal. To control extra load the slave board TT-S1 can be easily mounted into the unit.
These TTC-electric heating controllers are intended for control of electric heating bateries or radiators. The controller pulses the entire power output ON/OFF and utilises time-proportional triac control. The controller is intended for DIN-rail mounting. Automatic adaptation of control function, P or PI control. It can also be set to be controlled by an external 0 ...10 V DC signal.
----------------------------------------------------------------------------------
ELECTRIC HEATING CONTROLLERS PULSER
|
Controller Pulser
Supply voltage: 200...415 V AC, 50...60 Hz,
1~ or 2~, automatic adaptation
P-band: 20 K (Rapid temperature changes)
1,5 K (Slow temperature changes)
Pulse period: 60 s
Output: 16 A (1 A) 1~ max 3,6kW, 2~ max 6,4kW
Reset-time: 6 min (Rapid temperature changes)
Protection class: IP30
Mounting: Wall-mounting |
 | ----------------------------------------------------------------------------------
ELECTRIC HEATING CONTROLLERS PULSER/D
|
Controller Pulser/D
Supply voltage: 200...415 V AC, 50...60 Hz,
1~ or 2~, automatic adaptation
P-band: 20 K (Rapid temperature changes)
1,5 K (Slow temperature changes)
Pulse period: 60 s
Output: 16 A (1 A) 1~max 3,6kW, 2~ max 6,4kW
Reset-time: 6 min (Rapid temperature changes)
Protection class: IP20
Mounting: DIN-rail |
 | ----------------------------------------------------------------------------------
ELECTRIC HEATING CONTROLLERS PULSER-ADD
|
Controller Pulser-ADD
Supply voltage: 200...415 V AC, 50...60 Hz,
1~ or 2~, automatic adaptation
P-band: 20 K (Rapid temperature changes)
1,5 K (Slow temperature changes)
Pulse period: 60 s
Output: 16 A (1 A) 1~ max 3,6kW, 2~ max 6,4kW
Reset-time: 6 min (Rapid temperature changes)
Protection class: IP30
Mounting: Wall-mounting |
 | ---------------------------------------------------------------------------------
ELECTRIC HEATING CONTROLLERS PULSER-DSP
|
Controller with display Pulser-DSP
Supply voltage: 200...415 V AC,
automatic adaptation
P-band: 0,5...99,9 K
Comfort heating: 0...30°C
Output: 2,6 kW at 230 V AC, 4 kW at 400 V AC
Presence detection: ON/OFF
Protection class: IP30
Mounting: Wall-mounting |
 | ----------------------------------------------------------------------------------
Other electric heating controllers PULSER-M, PULSER-X/D, PULSER-HC-LON under request.
---------------------------------------------------------------------------------
ELECTRIC HEATING CONTROLLERS TTC2000
|
Controller TTC2000
Supply voltage: 3~, 210...255/380...415 V AC,
automatic adaptation
Output: Max 25A, min 3 A/phase
Control signal: 0...10 V DC
Protection class: IP30
Mounting: Wall-mounting |
 | ---------------------------------------------------------------------------------
ELECTRIC HEATING CONTROLLERS TTC25
|
Controller TTC25
Supply voltage: 3~, 210...255/380...415 V AC,
automatic adaptation
Size (WxHxD): 195x100x95, 11,2 moduliai
Output: 25 A, 400 V AC, 17 kW (230 V, 10 kW)
Control signal: 0...10 V DC
Protection class: IP20
Mounting: DIN-rail |
 | ----------------------------------------------------------------------------------
ELECTRIC HEATING CONTROLLERS TTC40F
|
Controller TTC40F
Supply voltage: 3~, 210...255/380...415 V AC,
automatic adaptation
Size (WxHxD): 195x220x95, 11,2 modules
Output: 40 A, 400 V AC, 27 kW (230 V, 16 kW)
Control signal: 0...10 V DC
Protection class: IP20
Mounting: DIN-rail |
 | ----------------------------------------------------------------------------------
ELECTRIC HEATING CONTROLLERS TTC80F
|
Controller TTC80F
Supply voltage: 3~, 400 V AC,
Size (WxHxD): 195x220x105, 11,2 modules
Output: 80 A, 400 V AC, 55 kW
Control signal: 0...10 V DC
Protection class: IP20
Mounting: DIN-rail |
 | ---------------------------------------------------------------------------------
Other electric heating controllers TTC25X, TTC40FX, TTC63F under request.
---------------------------------------------------------------------------------
Ever Yours
NIT
|
